ORKEL MP 2000 - 5.5 Hydraulic scheme, name and position

87

   
1 Triple pump 18 Hydraulic gear 3.1 : 1
4 Gate ange 90° 1/2” x 30 19 Hydraulic gear 8.4 : 1
5 Gate ange straight 3/4” x 40 20 Throle valve 1/4”
7 Block 33.3 21 G. Rotor
8 Block 33.4 22 Hydraulic gear 16.4 : 1
9
High pressure relief valve. 1/2”
150 bar
23 G. Rotor
10 Flow Div. 24 G. Rotor
11 Block 33.2 25 Cylinder 50 x 30 x 600
12 G. Roller Br 26 Cylinder 32 x 20 x 150
13 Block 33.1 27 Cylinder 40 x 25 x 500
14 Manometer 0 - 100 bar R1/4” 28 Check valve 3/8”
15
High pressure relief valve. 1/2”
180 bar
29 Throle valve
16 Solenoid valve 30 Check valve 60 l/h 0,35 bar
16A Coil 12V 32 Return lter
16B DIN Plug 12/24V 33 Pressure relief valve 50 l/min 70 bar
17 G. Rotor 34 Block
35 Check valve 3/8” 40 l/min 0,35 bar