– 12 – – 13 –
• White – Clean and Polish mode switching
continuously and whitening teeth.
HOW TO USE
1. Place the brush head firmly onto the to-
othbrush shaft. There is a small space be-
tween the brush and the main unit. This
is normal and is necessary for the head to
vibrate properly.
2. Place the toothpaste on the head and wet it.
3. Place the toothbrush in your mouth. Turn
the brush on.
4. Guide the brush head slowly from tooth
to tooth, the ORO-SONIC BASIC will stop
for a while each 30s for changing brushing
area. After 2 minutes, ORO-SONIC BASIC
stop automatically.
To Next Page
Loading...