INTRODUCTION
Orthman’s Vertical Fold Toolbars are the leading folding toolbars in the row crop industry. The innovative internal fold 4” x 24” cylinders can be set to fold
the toolbar to 90°, 115 °, 135°, or 180° making the Vertical Fold Toolbar the most versatile bar in agriculture. Vertical Fold Toolbars are factory set to fold to
the degree specied with the order. Vertical Fold Toolbars are available in size congurations up to 16 row 30”. The strong construction, utilizing 3/8” wall
tubing (1/2” wall tubing center sections on models totaling more than 30’ in total length), makes the Orthman Vertical Fold Toolbar a durable choice.
1 - 1
8315 Cultivator on Vertical Fold Toolbar
Category 3 or Category 4 three point hitches are available for Orthman Vertical Fold Toolbars and are available in multiple lengths and 3 dierent
hitch heights. Hinges are 14” wide and line-bored for smooth hinge movement and superior strength. All bars feature integrated bar stands, wing
rests (for toolbar foldings greater than 90°), safety lighting & decals.
This manual is considered to be an integral component of the
Vertical Fold Toolbar
and is designed to educate the owner and/or operator(s)
regarding safety, operation, maintenance, troubleshooting, and component identication. All personnel involved in the operation of this implement
are responsible for reading and understanding entire manual content. This manual is designed to keep the operator safe and knowledgeable as well
as prolong the life of the implement and maximize eld eciency. This manual should accompany the implement if it were ever to be sold.
We would like to thank you for placing your condence in Orthman Mfg., Inc. Your
Vertical Fold Toolbar
is manufactured to meet the highest
standards and is built with precision and strength to increase your agricultural operation’s dependability and protability.
Thank you for choosing Orthman.
To Next Page
Need help?
General
