ORVIBO W40CZ - User Manual

To Next Page

User manual - W40CZ Curtain Motor

1. Product profile

The curtain motor is the upgrade product of traditional manual curtain. It is supposed to

applied on supper tall and long curtain. It has excellent functions, like travel memory,

manual open and close, stop when meeting resistance, low noise design, linkage with

multiple device and long service time etc. It will not only solve the annoyed issues like

solar radiation, heat insulation dazzle light and private protection, but also create warm

and sweet environment to make your life more convenient. The motor can be integrated

with smart home system and controlled by App. What’s more, It’s can share data with

smart switch, smart socket, smart lock, Infra-red sensor and door sensor to make the

linkage with others.

2. Operation introduction

Configure the motor in smart home system.

Short press: press key for 1 seconds

Long press: press key more than 3 seconds

Network configuration:

Power on the motor, press the reset hole button for four times and long press the button

for 5 seconds at the fifth time to reset it.

Open HomeMate APP, click “+” button on the up right corner, “Shade”, “ZigBee Curtain

Motor” to connect the motor.

Factory reset:

Power on the motor, press the reset hole button for four times and long press the button

for 5 seconds at the fifth time to reset it.

Detect the length of curtain rail.

a. Long press the button on the motor for 7 seconds until the LED flashing;

b. Press the button again;

c. Power off the motor;

d. Repower the motor

Change the direction of motor:

Press the button 4 times, and hold 2 sec the last two press. In first two press, light blinks

BLUE once, then in last two press, hold press until it blinks twice.

3. Specification

W40CZ Curtain Motor

Need help?

Do you have a question about the ORVIBO W40CZ and is the answer not in the manual?

Summary

Product Profile

Operation Introduction

Network Configuration

Steps for connecting the motor to a smart home network.

Factory Reset

Procedure to restore the motor to its default factory settings.

Detect Curtain Rail Length

Guide to setting the motor's travel limits for the curtain rail.

Change Motor Direction

Instructions for reversing the motor's operational direction.

Specifications

Function Features

Installation Procedure

Structure and Accessories

Details on the motor's components and necessary installation parts.

Installation Steps

Step-by-step guide for physically installing the curtain motor and track.

Failure Process