Need help?Do you have a question about the Osaki OS-PRO Maestro and is the answer not in the manual?
Unpack the massage chair and identify all included components and accessories.
Gently pull the cloth strip to detach the side panel cover from the main unit.
Connect the power cord and activate the main power switch.
Connect the data line and air hose for the footrest.
Hang the footrest onto the seat base and secure it using the buckle.
Align part A on the armrest with part B on the main unit, then insert the armrest.
Connect the data line and air hose for the side panel.
Fasten the side panel using four screws.
Pull the two zippers located between the footrest and seat base.
Pull the two zippers on the seat pad.
Secure the waist cushion to the backrest using the elastic belt.
To Next Page
General