Why is my Osaki OS-4000 not working but the remote is?
If the remote control works but your Osaki Massager isn't functioning, it might have overheated from extended use. To resolve this, switch off the power and let the chair cool down for approximately 30 to 50 minutes.
What to do if my Osaki OS-4000 Massager remote and chair are not working?
If neither the remote control nor the Osaki Massager is working, ensure the chair is properly plugged into a functioning power outlet. If it is, try turning the power switch off and then on again to reset the system.
How to fix an Osaki OS-4000 Massager that is plugged in but not working?
If your Osaki Massager is connected to power but not turning on, first check that the power plug is securely connected and the outlet is working. Next, ensure that the massage chair's power switch is set to the 'I' position.
General| Airbag Massage | Yes |
|---|---|
| Zero Gravity Recline | Yes |
| Heated Therapy | Yes |
| Body Scan Technology | Yes |
| Foot Rollers | Yes |
| Remote Control | Yes |
| Reclining | Yes |
| User Height Range | 5'0" - 6'2" |
| Weight Capacity | 265 lbs |
| Adjustable Intensity | Yes |
| Auto Programs | 6 |
| Manual Programs | Yes |
| Weight | 220 lbs |
| Power Requirements | 110-120V |
| Massage Techniques | Kneading, Tapping, Rolling, Shiatsu |
| Warranty | 3 years limited |
| Massage Areas | Back, Shoulders, Feet |
Essential precautions for safe operation, covering electrical safety, usage environment, and user supervision.
Ensure the plug is fully inserted into an appropriate outlet; consult an electrician if the plug does not fit.
Instructions for powering the chair on/off and adjusting the backrest and footrest angles for comfort.
Addresses issues like chair not functioning, remote working, or both failing, providing step-by-step solutions.
To Next Page