EN
ng the car seat for 9-18 kg (Group I, approx. 9 months to 4 years)
Install the child seat in consiste on.
Step 1: Place the child seat on the
vehicle‘s seat ensuring that it fi rmly
leans against the car seat backrest.
St
on: From the back view, make sure
that the seat belt goes under the belt of the child‘s
seat, go over is the incorrect installa
on. This is very
important.
Step 4: Make sure that the seat belt is
not twisted. Also make sure that the
on of seat belt webbing goes
under the armrest and the diagonal
on of the seat belt webbing goes
under the red clip. Fastening the belt
into the buckle, make sure that you
hear a „click“ and then fasten the belt.
Step 2: Fasten the seat cushion
and backrest fully as shows in the
picture.
To Next Page
Loading...
Need help?
General
