Fi ng the car seat for 15-36 kg with Isofi x
Click
1. Rotate out the Iso x connectors un l you hear ”Click”. Check that the Iso x connector is moving
within the angle of 15°, and cannot turn around.
2. Pull a erwards the black plas c coat of Iso x connectors un l red appears in the window.
3. Put the red plas c protectors on the correct posi on on the car, in order that the Iso x connec-
tors can get into these protectors.
4. Place the child safety seat on the vehicle‘s seat. Push the Iso x connectors towards the xed
points un l green appears in the window.
5. Place the child in the child safety seat and fasten it into buckle.
Fasten the seat belt, make sure that
a) the diagonal sec ons of the seat belt webbing goes over the armrest.
b) the lap sec on of the seat belt webbing goes under the armrest.
c) the diagonal sec on goes through the red belt guide on the side of the headrest.
6. Make sure that the seat belt has not become twisted. Also check that the cover is not impeding
the movement or t of the seat belt webbing in any way. Ensure lap sec on of belt is worn low
down, so that pelvis is rmly engaged.
EN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
