- 16 -
EN
ATTENTION!
• Plug the connection plug only into a 12 V DC on-board power socket in your car that corre-
sponds to the “Technical data” contained in these instructions.
• Never pull the connection plug out of the on-board power socket by the connection cable.
• Before using the child car seat with Klimax technology, please ensure that the ventilation
openings on the child car seat are not covered up.
• Protect the child car seat and its connection cable – including the connection plug – from
moisture.
03. INTENDED USE
Essentially, the child car seat with Klimax technology is intended for transporting a child in a car.
Use in other means of transport (truck, bus, plane, boat) is not permitted.
These operating instructions explain how to operate the Klimax technology. To ensure the
proper installation of the child car seat in your car and for further safety instructions relating
to the child car seat, please read the separate operating instructions for the respective child
car seat!
The Klimax technology can be used in all cars equipped with a 12 V on-board power socket.
04. SCOPE OF DELIVERY
Illustrations of the seat booster and child car seat are for example purposes only.
a
a
Fan (seat booster 2 x)
b
Fan casing
c
Pressure sensor
d
Temperature sensor (inside the body)
e
Control circuit board (behind the display)
f
12 V plug with switch and
connection cable
g
Display
h
Heating pad (1 x seat area)
i
Operating instructions (without illustration)
e
b
b
f
h
c
g
a
d
To Next Page
Loading...
Need help?
General