EasyManuals Logo

osann One360 SL User Manual

osann One360 SL
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
- 16 -
WARNING
Please read through these instructions carefully before use and keep them for subsequent
reference in order to guarantee the safety of your child. Non-compliance with the instructions
in this manual may result in serious injuries to your child.
The child seat can only be used with its own 5-point belt system for children who weigh
under 18 kg (group 0+ and group 1).
The child seat CANNOT be used with the 5-point belt system for children who weigh over
18 kg (Group 2 and 3).
The child car seat can be installed in a rear-facing position and forward-facing position with
the Isofi x fi xture and the support leg. Important: Do not install forward facing until the weight
of the child reaches at least 9 kg.
For the Isofi x installation: Be sure to read the car manufacturer’s manual.
Do not use load bearing contact points other than those described in the instructions and
marked in the child restraint system.
Do not use this child car seat at home. It has not been designed for use at home and should
therefore only be used in a car.
Do not leave your child unsupervised in the seat at any time.
Do not place the rear-facing child car seat on the front seat with an airbag. T h i s
could result in death or serious injury.
The child seat should be replaced if it is exposed to heavy impact during an accident.
For safety reasons, the child car seat must be secured in the vehicle even when your child is
not sitting in the child car seat.
Always make sure that all belts that hold the seat holder to the vehicle are secure and that all
belts that restrain the child are adjusted to the child’s body. Please also ensure that
the belts are not twisted.
Items of luggage or other objects that could cause injury in the event of a collision must be
properly secured.
The rigid items and plastic parts of a child restraint system must be placed and installed so
that they cannot get caught by a movable seat or a vehicle door during everyday use.
It is important that low-lying belts hold the pelvis rmly in place. To avoid the risk of falling,
your child should always be strapped in.
It is dangerous to make changes or additions to the product without approval from the re-
sponsible authority. Non-compliance with the installation instructions provided by the man-
ufacturer of the child restraint system is also associated with risks.
This child seat has been designed for newborns and children weighing up to 36 kg. Never
overload the child seat by transporting more than one child or additional loads in it.
The child restraint system must not be used without the seat cover.
The seat cover must not be replaced by a cover other than that recommended by the manu-
facturer as this seat cover is an important component of the restraint performance.
EN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the osann One360 SL and is the answer not in the manual?

osann One360 SL Specifications

General IconGeneral
Weight Range0-36 kg
InstallationISOFIX and Top Tether
Rotation360°
Harness Type5-point harness
Group0+/1/2/3
Safety StandardECE R44/04
Age Range0-12 years
Side Impact ProtectionYes
Headrest AdjustmentAdjustable
CertificationECE R44/04
Recline PositionsMultiple
Upholstery MaterialBreathable Fabric

Related product manuals