EasyManua.ls Logo

osann One360 SL - Isofix Connector Installation; Support Leg Operation

osann One360 SL
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 20 -
EN
Comfort insert
up to max. 13 kg
Baby insert
(under comfort insert)
up to max. 9 kg
The comfort insert and baby insert
Isofi x connectors
• Insert the yellow insertion aids through the slit in
the cushion between the backrest and seat and
into the Isofi x holders.
• When doing this, the fl at side must be facing
downward. This step is not necessary if the vehicle
already has fi rmly installed insertion aids.
• Press the buttons on the Isofi x connectors on both
sides to extend these.
• Slide the Isofi x connectors into the insertion aids
and press them in until you hear these lock in
place.
• The indicators on both sides only show green
when the connections are in place. Press the child
car seat against the backrest until it is securely in
position.
Support leg
• Fold out the support leg underneath the child car
seat.
• Press the button to adjust the height of the support
leg and ensure that this is fully in contact with the
footwell of your vehicle.
• Ensure that the indicator on the support leg is
showing green.