osann SWIFT360 - INSTALLATION OF THE CHILD CAR SEAT; Group 1 (rear-facing)

- 24 -
INSTALLATION OF THE CHILD CAR SEAT
Group 1 (rear-facing)
(For children who weigh 9-18 kg)
1
2
• Press the two lateral Isox connector
buttons in order to extend the Isox connectors
to their full length.
• Insert the Isox connectors into the insertion aids
and press until they lock.
• The display on both sides only turns green when
the connections have been established. Pull the
child car seat to the back rest until it is standing
securely.
• Remove the Top-Tether from the bag.
• In order to loosen the Top-Tether, press the grey
adjustment button with one hand and pull the
side of the belt anchor to the required length
with your other hand.
• Pull the Top-Tether through the belt guide, which
is marked in blue, on the reverse side of the child
car seat.
• Fix the anchor to the xation point on the back
of the car seat.
• Pull the Top-Tether tight by pulling on the oth-
er side of the belt. Make sure that the display is
green.
Group 1 (forward-facing)
(For children who weigh 9-18 kg)
3
Installation option: Isox + Top-Tether
1
EN