osann SWIFT360 - Group 1 (forward-facing)

- 25 -
INSTALLATION OF THE CHILD CAR SEAT
Group 1 (forward-facing)
(For children who weigh 9-18 kg)
• Place the child car seat onto the car seat, set
it to the maximum angle and turn it towards
the car door.
• Unlock the belt buckle of the child car seat
and place the belt on the outer side of the
seat.
• Put the child in the child car seat.
• Adjust the height of the head support so that
the shoulder belt remains free.
• Close the belt buckle again until a “click” can
be heard.
• Pull on the front adjustment belt in order to
pull the belt tight. Please ensure that the
straps are not twisted.
• Turn the seat into the rear-facing position.
Check whether the child car seat is locked
in this position.
3
Installation option: Isox + Top-Tether
1
• Place the child car seat onto the car seat
and move it into the forward-facing position.
• Press the two lateral Isox connector
buttons in order to extend the Isox connec-
tors to their full length.
• Insert the Isox connectors into the insertion
aids and press until you hear them lock.
• The display on both sides only turns green
when the connections have been estab-
lished. Press the child car seat against the
back rest until it is standing securely.
EN