Need help?Do you have a question about the OSD Audio NERO TUBEBASS 10 and is the answer not in the manual?
Open the box carefully, remove staples, and inspect the subwoofer for defects. Ensure packaging is empty before disposal.
Ensure equipment is off before connecting. Disconnect cables before moving. Check connections and volume before powering on.
Place subwoofer in a cool, ventilated area, away from moisture or extreme heat. Recycle product materials.
Details on power plug, ON/OFF switch, phase inversion, crossover, volume controls, and input connections.
Connect the subwoofer's input to the SUBWOOFER OUT on your A/V unit using RCA connectors.
Connect the subwoofer's input to the PRE-OUT (L+R) output of your stereo amplifier.
Verify connections and amplifier volume, connect power, switch ON, then adjust settings. Disconnect when not in use.
Optimize placement for sound resolution and use phase inversion switch for coherence. Test settings for best results.
Check power supply, input signal, and amplifier settings for common issues like no sound or low volume.
Details on power, woofer size, frequency range, phase, input type, and unit dimensions.
Covers a 2-year limited warranty, exclusions, and return procedures for repairs.
To Next Page
General
