注意:
本機之行走距離及其位置由機器自我記憶，
斷電中嚴禁外力推動機器使其移位，以確保接續使用之準確性與安全性。
操作人員一旦離開機器再回來操作之前，請務必確認機器尚在原先停止位置未被移
動，才可開始工作。
如發現機器已被移動，要重新做一次 “位置歸 0”再繼續工作(參照第 17 頁)。
Notice:
The machine travel length and positioning are controlled by computer. It is strictly
not allowed to move machine manually when machine is power off.
When operator resumes back to work on machine, please make sure the spreader is
not moved manually by anyone during the power off.
If the machine is manually moved during power off mode, please do calibrate the
machine position into origin as instruction manual (page 35).
02
To Next Page
Loading...