What to do if my Oshkosh Corporation Boom Lifts shows high engine temp?
If your Oshkosh Corporation Boom Lifts engine temperature is high, check for any obstructions that might be blocking the cooling airflow to the engine. Also, make sure the ambient temperature is within the engine's design limits. Finally, verify that the engine temperature sensor is working correctly.
What to do if Oshkosh Corporation Boom Lifts unit is off or disabled and the engine will not crank?
If your Oshkosh Corporation Boom Lifts unit is off or disabled and the engine won't crank, check the position of the selector switch and ensure the inhibit run is released. Check the warning LED and address any faults before restarting the RBS. Verify the start battery voltage, check the control fuse, and inspect for loose wiring or connections.
General| Fuel Type | Electric |
|---|---|
| Max Working Height | 46 ft (14.02 m) |
| Platform Height | 40 ft (12.19 m) |
| Platform Capacity | 230 kg |
| Platform Size | 0.76 m x 1.17 m |
| Weight | 14, 600 lb (6, 622.44 kg) |
| Drive Speed | 4 mph (6.4 km/h) |
| Machine Length | 20 ft |
| Stowed Height | 2.0 m |
| Lift Capacity | 500 lb (227 kg) |
| Tire Type | Solid |
| Horizontal Reach | 31 ft 3 in (9.53 m) |
To Next Page
