OSI 5803 User Manual

MODEL 5803 ADVANCE CONTROL BASE
FOR THE
MODULAR TABLE SYSTEM
MAINTENANCE and REPAIR MANUAL
30031 Ahern Avenue
Union City, CA 94587-1234
Bus: 510-429-1500 Toll Free: 800-777-4674 Fax: 510-429-8500
 OSI 2005 NW 0422 Rev.G
®

OSI 5803 Specifications

General

Brand	OSI
Model	5803
Category	Medical Equipment
Language	English

Summary

Important Notices

Protection Against Electrical Shock Hazard

Explains symbols and precautions related to electrical shock hazards.

2.0 Controls Identification

2.1 Major Component Identification

Identifies the major components of the 5803 Advanced Control Base using figures.

4.0 Pre-Operational Function Check

5.2 Control Operation

5.3 Rotation Safety Lock

5.4 180°- Rotation Lock Indicator

5.6 Hand Control Module

5.7 Synchronizing The Lateral Tilt Function

5.8 Tabletop Coupling Procedure

5.10 Rotation Procedures

5.12 Rotation Procedure For The 5803 Base

6.0 Cleaning and Maintenance

6.1 Cleaning and Disinfecting

Detailed instructions for cleaning and disinfecting the 5803 Base exterior and casters.

7.0 The Electrical System

7.1 Description

Overview of the 5803 Base's AC and battery power sources.

7.3 ON/OFF Power/Circuit-Breaker Switch

7.4 Power ON / Fault / Battery Status Lights

7.5 Battery Recharging

8.0 Troubleshooting

8.1 Electrical System

Provides troubleshooting steps for common electrical system malfunctions.

9.0 Removal and Replacement of Components

9.1 Head-end Cover

Step-by-step instructions for removing the Head-end Cover.

9.2 Foot-end Cover

9.3 Hand Control Module

9.4 Batteries

9.5 Power Supply

9.6 Controller Circuit Board

9.7 On-Off Power Switch / Circuit Breaker

9.8 Head-end Assembly

9.9 Head-end Tilt Motor

9.10 Foot-end Rotation Safety Lock Motor

9.11 Head or Foot-end Column

9.12 Retractable Center Beam

10.0 Adjustment of Components

10.1 Tilt Actuator Rod End Length

Procedure for adjusting the Tilt Actuator Rod End Length.

10.2 180° Rotation Lock Sensor

Steps for adjusting the 180° Rotation Lock Sensor.

10.3 Home & Tilt Left/Right Sensors

10.4 Head-End Slider Adjustment Procedure

10.5 Rotation Safety Lock

10.6 Rotation Safety Lock (Brake) “ON” Sensor Setting

13.0 OSI Technical Service

13.1 Contact for Parts and Service

Contact information for OSI Technical Services for repair and parts.

13.2 To Order Replacement Parts (RP)

13.3 To Return Damaged Parts (RGA)

13.4 To Send a Part or Item Here for Us to Repair (RA)