EasyManua.ls Logo

osily OSPH1000E - Weekly Timer; Programming Heating Periods; Timer Operation Notes

osily OSPH1000E
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.osily.co.uk
Weekly Timer
To Change the heater into Weekly timer mode. Press the SET button until “W” is displayed
Press the button to choose between the following pre- programmed heating periods:
1. Monday to Friday
2. Monday to Saturday
3. Individual days
4. Monday, Wednesday, Friday
5. Tuesday, Thursday, Saturday
6. Weekend
7. Monday to Wednesday
8. Thursday to Saturday
9. Monday to Sunday
Once the pre set heating period has been selected e.g. 1. for operation Monday to Friday then each
single hour starting from midnight needs to be assigned to either an on or off setting, for all 24 hours.
Therefore, for example to set the heater to be on from 06.00 until 08.00am, and then on at 18.00
until 22.00 please programme as follows.
1. Press the DOWN button 6 times the display will show 06.00
(this will set all hours to off until 06.00)
2. Now press the UP button twice the display will show 08.00
(this will set the heater to be on for 2 hours until 08.00)
3. Now press the DOWN button 10 times to set the heater to be off until 18.00.
4. Now press the UP button 4 times to set the heater to be on until 22.00.
5. Now press the DOWN button to set the last 2 hours of the day until midnight to
set the heater to be off.
While the unit is operating under the weekly timer, it will heat upto the temperature set within
the ON mode.
Notes: When the room temperature reaches the desired level, the heater will change to Low Heat
mode. When room temperature is 2 degrees over the desired temperature, the heater will enter
standby mode. The heater will resume operation when the temperature drops 2 degrees below
the desired temperature.

Related product manuals