osily OSPH1000E - Operation; Turning On, Modes and Heat Level; Setting Day, Time and Temperature; Child Lock Function

www.osily.co.uk
Operation
Turning On
The unit should be turned on using the power switch on the side. The unit has 3 modes.
Press the SET button to change the heater into the desired mode. The current mode
will be indicated on the display
Standby Mode
On
Weekly Timer Mode
Setting the Day and Time
With the heater in Standby Mode: Display will show P
Press and hold the MODE button to set the hour
Press and hold the MIN button to set minute
Press and hold the SET button to set the day
Heat Level
Press the SET button to put the heater into ON mode the heat level icon will display ,
press this button to change between high heat setting and low heat options:
Low Heat
High Heat
Temperature Adjustment
Whilst in ON mode use the UP and DOWN buttons to adjust the desired temperature
(Range of 5°-40°C). The display shows the current detected room temperature on the left and the
desired room temperature on the right.
Child Lock
Press and hold the HEAT button for 5 seconds and the lock symbol will be displayed.
All buttons are deactivated. To exit the child lock, press and hold the HEAT button again
for 5 seconds.
Day
Hour
Minute
Mode