Why is my Ositech Communications Titan III not working with CISCO WLC Access Points?
If you are experiencing unreliable operations with your Ositech Communications Gateway when using CISCO WLC Access Points, it may be due to CCX (Cisco Compatible Extensions) options being enabled. It is recommended to disable this feature on the CISCO WLC Access Points. This should restore reliable operations with the Titan III Wireless Gateway.
What to do if Ositech Communications Titan III Gateway WiFi failed connections at Stage 2?
If your Ositech Communications Gateway is failing to connect to Wi-Fi at Stage 2, it could be because the Gateway is not within an acceptable range of the wireless access point. Try moving your physical location closer to the wireless access point.
How to fix Ositech Communications Gateway WiFi failed connections at Stage 3?
If your Ositech Communications Gateway is failing to connect to Wi-Fi at Stage 3, possible causes include the authentication type and/or the key if required. Verify your authentication type is correct, and then re-enter your key if required.
What to do if Ositech Communications Gateway cellular failed connections at Stage 3?
If your Ositech Communications Gateway is experiencing cellular connection failures at Stage 3, examine your current location for signal strength, check for antenna obstructions, and verify your data account with the cellular provider. Also, ensure the SIM Card was inserted BEFORE powering on your gateway.
Why is my Ositech Communications Titan III Gateway WiFi failing connections at Stage 4?
If your Ositech Communications Gateway is failing to connect to Wi-Fi at Stage 4, possible causes include the settings of your wireless Access Point itself, the backhaul connection to the Access Point (i.e. the WAN cable is disconnected), and/or the WEP key.
Why is my Ositech Communications Gateway cellular failing connections at Stage 4?
If your Ositech Communications Gateway is experiencing cellular connection failures at Stage 4, possible causes include the APN (Access Point Name) string, and username and password credentials if required for your specific cellular provider.
How to fix Ositech Communications Titan III WiFi failed connections at Stage 1?
If your Ositech Communications Gateway is failing to connect to Wi-Fi at Stage 1, verify that the SSID name you entered is indeed correct.
What to do if Ositech Communications Titan III Gateway cellular failed connections at Stage 2?
If your Ositech Communications Gateway is experiencing cellular connection failures at Stage 2, ensure your SIM is fully and properly inserted into the sim card slot.
How to solve Ositech Communications Titan III Gateway cellular failed connections at Stage 1?
If your Ositech Communications Gateway is experiencing cellular connection failures at Stage 1, verify the Gateway is externally powered while connected to USB.
Guides users through installing the Ositech Titan III Gateway Configuration Utility software on a PC.
Configures essential Ositech Titan III Gateway settings for LIFENET System access.
Configures Cellular Carrier, Model No., and Serial No. for gateway identification.
Sets the username for registering the Ositech Titan III Gateway with the LIFENET System.
Configures wireless connection parameters for the Ositech Titan III Gateway to connect to the Internet.
Registers the Ositech Titan III Gateway with the LIFENET System for transmissions.
General| Brand | Ositech Communications |
|---|---|
| Model | Titan III |
| Category | Gateway |
| Language | English |
To Next Page
