The OSITO Health Expert Electronic Stimulator is a device designed to alleviate or reduce human muscle pain, swelling, fatigue, and aches, while also promoting blood circulation. It operates on the principle of low-frequency current stimulation, which causes muscle contraction and relaxation. This action helps to recycle blood, accelerate circulation, and relieve various symptoms.
Function Description:
The stimulator utilizes low-frequency current to stimulate specific points on the human body, inducing muscle contraction and relaxation. When a muscle relaxes, blood flows into it, and when it contracts, blood containing metabolites is expelled. This cyclical action is crucial for improving blood circulation and alleviating pain, swelling, fatigue, and other related symptoms. The device is particularly effective for foot circulation massage.
It features 50 kinds of electromagnetic wave intensity settings, allowing for continuous adjustment to achieve optimal results. The timer is adjustable from 5 to 90 minutes, with a default setting of 25 minutes. There are 25 distinct massage modes for both the sole of the feet and the body, each designed to address different symptoms and reduce fatigue. All functions can be conveniently operated using a remote controller.
Important Technical Specifications:
- Model Number: AST-300J
- Power Supply: Rated 5 V dc, 1000 mA, powered by adaptor HSMA05U-050100.
- Rated Voltage: 100-240V
- Rated Input: 0.1 A
- Rated Frequency: 50-60Hz
- Rated Output: 5V 1000mA
- Output Waveform: Square wave
- Pulse Repetition Frequencies: 1-200Hz
- Pulse Duration: 115 µS
- Maximum Amplitude of Output Voltage: 72V
- Effect of Load Impedance: 1KΩ
- Software Version No: MC0188F-REV-V1.0
- Operation Condition: Temperature 10-40°C, Relative Humidity 30%-75%RH, Atmospheric Pressure 860 hPa to 1060 hPa.
- Storage and Transport Condition: Temperature 0-40°C, Relative Humidity ≤80% RH, Atmospheric Pressure 860 hPa to 1060 hPa.
- Electrode Gel Pads: Size 60x90mm.
- Safety Classification: Type BF of Class II according to Clause 5.
- EMC Compliance: Complies with IEC 60601-1-2 for electromagnetic compatibility, including emissions (CISPR 11 Group 1 Class B, IEC 61000-3-2 Class A, IEC 61000-3-3 Complies) and immunity (IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-6, IEC 61000-4-3).
Usage Features:
The device is designed for ease of use. To begin, users should place both bare feet on the unit. The unit is turned on by pressing the switch button, which illuminates the LCD screen. Modes can be adjusted using the "Mode+" and "Mode-" buttons, with a maximum of 25 modes available. Intensity can be increased or decreased using the "Sole+"/"Sole-" for foot sole output and "Body+"/"Body-" for electrode pad output, offering a total of 50 intensity levels. It is recommended to adjust intensity gradually from lower to stronger. If a mode is reset, the intensity returns to "0" to prevent shock. The device can be turned off at any time by pressing the switch button.
For optimal results, it is suggested to soak feet in warm water to soften the skin before use. The device is made from ABS materials and designed with man-machine engineering science in mind, giving it a modern, fashionable, and delicate appearance.
Usage of Electrode Gel Pads:
- Connect output wires to the electrode gel pads and then to the stimulator.
- Remove the protective film from the adhesive pads and attach them steadily to the skin.
- Keep adhesive gel pads clean and away from high temperatures or direct sunlight.
- If pads become less adhesive or dirty, wipe them with a wet cloth or replace them. Do not use chemical products for cleaning.
- Pads should be replaced if their effects diminish or if they haven't been used in a year.
Warnings and Cautions:
- Not suitable for patients with critical illnesses, tumors, cancer, hyperthyroidism, active tuberculosis, suppurative inflammation, heart disease, high blood pressure, severe diabetes, skin allergies, traumatic bleeding, fractures in healing period, or psychopath behavior.
- Pregnant women, and individuals with chronic or serious diseases should consult a doctor before use.
- Do not use if you have an implanted electronic device (e.g., cardiac pacemaker) without a doctor's agreement.
- Avoid using near H.F. surgical equipment or shortwave/microwave therapy equipment (within 1m) to prevent instability in stimulator output.
- Ensure skin is clean before applying electrode pads.
- Do not let electrode pads touch metal substances.
- Do not use in wet environments like bathrooms.
- Do not sit or stand on the device, or drop it.
- Stop use immediately if discomfort or nausea occurs.
- Do not apply electrodes near the thorax, as this may increase the risk of cardiac fibrillation.
- If product performance changes (e.g., weakened/no output, incorrect display), stop use and contact the manufacturer or maintenance professional.
- The device requires special precautions regarding EMC and should be installed according to EMC information provided in the accompanying documents.
- Portable and mobile RF communications equipment can affect the device.
- Using accessories, transducers, and cables other than those specified by the manufacturer may result in increased EMISSION or decreased IMMUNITY.
Maintenance Features:
- Clean the machine with a wet cloth and neutral cleanser; avoid volatile liquids like benzene, thinner, or gasoline.
- Keep the device away from magnetic fields and out of reach of children.
- Store in a dry place, away from moisture, high temperatures, direct sunlight, or sprinkling water.
- Do not dismantle, repair, or rebuild the machine yourself, as this will void the warranty.
- Remove batteries from the remote controller if not used for a long time.
- Dispose of waste products (electrode pads, carton box) according to local regulations.
The OSITO Health Expert Electronic Stimulator is a comprehensive device designed to promote well-being through targeted muscle stimulation and improved circulation, offering a blend of modern design and advanced functionality for home use.