Need help?Do you have a question about the Osko Edge Air 1417 and is the answer not in the manual?
Covers device classification, operational safety, RF compliance, and EMC information.
Explains safety symbols, warnings, and cautions for proper usage and handling.
Details medical purpose, patient groups, operating principles, and label information.
Introduces the detector and its main features and capabilities.
Lists and details all detector components, including optional accessories and their specs.
Specifies PC requirements, environmental conditions, and physical dimensions.
Guides through software installation, detector setup, mode selection, and calibration.
Step-by-step guide to install the detector's software.
Covers battery installation, mode selection, and various product setup configurations.
Explains how to perform auto and manual calibration for optimal image quality.
Covers initial setup, image handling, acquisition, viewing, and advanced detector functions.
Guides through product connection and initial setup steps.
Covers image setup, acquisition, viewing, and storage functions.
Details battery status, wireless signal, sleep mode, preview, OLED, and GPR features.
Provides instructions for cleaning, inspection, parts replacement, and disposal.
Instructions for cleaning and performing regular safety inspections of the detector.
Guides on replacing parts, and proper disposal or recycling of the device.
Explains the warranty policy, coverage, and claim process.
Introduces additional instructions for detector setup provided in this manual.
Guides on IP address configuration, wireless setup, firmware updates, and firewall settings.
Guides on setting the detector's IP address using the FPD Manager tool.
Instructions for configuring SSID and PSK for wireless connectivity.
Procedures for updating the detector's firmware and FPGA using FPD Manager.
Steps to ensure FPD Manager works correctly by configuring Windows Firewall.
Provides solutions for connection issues, IP problems, bucky noise, and auto-trigger errors.
Troubleshooting steps for network connectivity problems in wireless and wired modes.
Solutions for lost IP addresses and image noise issues related to reciprocating bucky.
Guidance on resolving issues with unintentional auto-triggering or blank image acquisition.
Lists the specifications for compatible medical generators.
General| Operating Temperature | -10°C to +50°C |
|---|---|
| Type | Motion Sensor |
| Detection Range | 12 meters |
| Detection Angle | 110 degrees |
| Power Source | Battery |
To Next Page