11. Associated Stations
This page shows information about devices that are currently associated to the access point.
Depending on the mode the OSBRiDGE 5G device is operating (Access Point or Polling Base
Station) the table will show following information:
Access Point Mode
No – Number of the associated entry.
MAC Address – MAC address of the associated device.
RX Signal – The RX Signal strength is the signal level the OSBRiDGE 5G device sees the
associated client with.
Data Rate – Over Air Data Rate for associated device. Data Rate is the speed at which
OSBRiDGE 5G device sends packets to the client.
RX Bytes – Number of bytes that have been received from the station since it associated itself
to the OSBRiDGE 5G device.
RX Packets – Number of data packets that have been received from the station since it
associated itself to the OSBRiDGE 5G device.
TX Bytes – Number of bytes that have been transmitted to the station since it associated itself
to the OSBRiDGE 5G device.
TX Packets – Number of data packets that have been transmitted to the station since it
associated itself to the OSBRiDGE 5G device.
To Next Page
Loading...