2.6 Function
2.7.1 Press the “START/ STOP” button.
All display symbols appear on the screen. The cu starts to inflate automatically.
2.6.1. The device has the WHO warning strip “ ” symbol display function, with the
blood pressure value change, the higher blood pressure value “ ” symbol will appear
relatively in the higher position (refer to WHO definition of high blood pressure levels-
reference table).
2.6.2. The device has the average of the last three display function (press the memory
key for the first time to display the value that is the average of the last three
measurements).
2.6.3. The device has a large screen display and legible digital reading.
2.6.4. The device has kPa and mmHg display switching and measurement functions.
2.6.5. The device has double memory lookup function and can store 120 sets of
measurements for each person to remember the normal status of your blood
pressure.
2.6.6.Low power detection: detecting low power under any working state, LED
displays “ ” symbol indicates low power.
2.6.7. Overpressure protection function: when the pressure is more than 300mmHg,
the device will cause automatic power consumption fastly.
2.6.8. Automatic shutdown function: no operation for 2 minutes the device will be shut
down automatically.
2.6.9. Heartbeat prompting function.
2.6.10. Prompting voice of completed measurement.
2.6.11. Incorrect prompting function.
2.7 Take a Measurement
2.7.1 Press the “START/ STOP” button.
All display symbols appear on the screen. The cu starts to inflate automatically.
To Next Page
Loading...