Charge
Stop the shaver (Fig 9)
Pull away the shaver heads on the side, one by
one and then rotate and pull out the middle head
in the arrow direction indicated on it.
Clean the shaver head part and the hair
storeroom for sometime with running water. (Fig
10) Make sure the inside of both the shaver and
the hair storeroom has been cleaned thoroughly.
Wash the product's surface.
Close the shaver head part and throw off surplus
water.
Open the shaver head part again and remain so
to dry up the product. (Fig 12). You can also use
the brush included to clean the hair storeroom.
1.
2.
3.
4.
5.
Do not wipe the shaver head part with a towel or
paper tissue, which may cause damages to the
shaver head.
Change the shaver head once a year to get the best shaving effect.
The shaver has a long service life if not damaged for human factors.
The damaged shaver head can only be replaced with shaver head of
this company.
To Next Page
Loading...