Osmo TopCutter - Cleanness; Lubricate; Nose Trimmer Instruction; Trim Nose Hair; Clip Ear hair

Take out the precision trimmer head, use brush to clean
the trimmer or clipper, or wash the trimmer head.
Do not use abrasive alcohol, gasoline or acetone etc.
liquid to wash the product.
You should clean the product immediately after using
once.
For best using and clean effect please add some
lubricating oil every three months. The lubricate oil isn't
included in this package. You need to. purchase it
yourself.
Cleanness / Lubricate
1.
2.
3.
4.
Make sure your nose is clean.
Open the switch, put the nose trimmer towards your
inside nose, turn the nose trimmer to clip your long nose
hair (Fig 21). Do not exceed 0.5cm for nose trimmer length
inside your nose. To reduce the itch, you should put one
side of the nose trimmer tip close to your skin.
Nose Trimmer Instruction
Turn off the shaver power, remove the shaver head, insert
the nose trimmer into the slot of the top shaver. Then press
down the nose trimmer head to installed in the shaver body.
(hear a sound like "kaca") (Fig 20)
Trim Nose Hair
1.
2.
Clean outside ear, make sure no earwax.
Open the switch, then turn the trimmer tip towards
your ear to clip your long hair.
Put the trimmer tip towards your outside ear lap slowly.
(Fig 22). Do not exceed 0.5cm for trimmer tip length
inside your ear.
Clip Ear hair
1.
2.
3.