To Next PageTo Next PageWhat to do if the dirty water tank is full on my OSOTEK H200 Lite?
If the dirty water tank of your OSOTEK Vacuum Cleaner is full, you should empty and clean the dirty water tank, then re-install it properly.
What to do if the dirty water tank is not installed in OSOTEK Vacuum Cleaner?
If the dirty water tank is not installed in your OSOTEK Vacuum Cleaner, reinstall the dirty water tank correctly.
General| Brand | OSOTEK |
|---|---|
| Model | H200 Lite |
| Category | Vacuum Cleaner |
| Language | English |
General safety precautions for using the vacuum cleaner, covering usage, maintenance, and potential hazards.
Guidelines for safe and effective use of cleaning solutions, including handling, storage, and disposal.
Details on EU conformity, and WEEE disposal and recycling guidelines.
Detailed illustration and labeling of the main vacuum cleaner components and controls.
Diagram of the charging dock and visual representation of included accessories.
Step-by-step instructions for attaching and detaching the handle to the vacuum cleaner.
Procedure for setting up the charging dock and connecting the power adapter.
Instructions on charging the vacuum cleaner and turning it on/off.
Explanation of buttons, LED screen indicators, and operational modes.
Step-by-step guide on filling the clean water tank with water and cleaning solution.
Procedure for preparing the vacuum cleaner for floor cleaning, including tilting and powering on.
Specifies the types of surfaces the vacuum cleaner is designed for and its operational capabilities.
Important warnings about using the vacuum cleaner on unsuitable surfaces or improper handling.
Details on Standard, Turbo, and Suction modes for different cleaning needs.
Instructions on how to properly pause, turn off, and return the vacuum cleaner to its charging dock.
Procedure for initiating and stopping self-cleaning, and tips for maintaining the unit.
Schedule for regular cleaning and recommendations for replacing parts like brushes and filters.
Detailed steps for removing, emptying, and cleaning the dirty water tank and its components.
Instructions for removing, cleaning, and re-installing the floor brush and its cover.
Guidance on how to clean the water and air separator component.
Steps for cleaning the charging dock and rinsing/drying the vacuum cleaner's filter.
Instructions for cleaning the exterior of the vacuum cleaner unit.
Guide to common error messages and their corresponding solutions for the vacuum cleaner.
Overview of frequent problems, their potential causes, and recommended solutions.
Technical details of the OSOTEK Horizon Wet and Dry Vacuum H200 Lite and its charging dock.
Technical details for the provided power adapter.
Important safety warnings regarding the environmental impact and handling of the battery.
Details about the product warranty, including coverage, claim process, and limitations.
