POCO CHILD CARRIER SERIES
7
3.1 Open the DoubleHalo child harness
by releasing both red harness
buckles located below the child’s
headrest.
3.5 To move the seat down pull up
the large cam buckle located at
the base of the child’s headrest
while pushing down on the seat
to reach the desired position.
3.6 Place child into carrier guiding each
leg through the corresponding left
and right Double Halo leg loops.
Ensure proper fit by confirming the
child’s chin is level with the top of
the drool pad.
3.10 Use the stirrups for children at
the top of the stated weight range
requirements in this owner’s manual.
Place feet in stirrups and adjust
the stirrup height so the child’s
knees are slightly bent to prevent
circulation deprivation.
3.7 Unbuckle the red male buckles on
the child harness from the grey
female buckles on the top corners
of the adult backpanel. Guide the
child’s arms through the Double Halo
harness arm loops.
3.8 Buckle the right and left red
harness male buckles into the
red female buckles located
below the child’s headrest and
behind the child’s shoulders.
3.2 Connect the red male child harness
buckles to the female buckles on the
top corners of the adult’s backpanel.
This keeps the harness out of the
way to make it easier to place the
child in the carrier.
3.3 For proper fit, the child’s chin should
be level to the top of the drool pad
at the front of the cockpit. Place
the child in the carrier to check if
adjustment is needed.
3.4 To move the seat up, grab the red
handle at the back of the seat and pull
up and the seat will automatically lock
into position.
3.9 Cinch down both right and left
straps so that the harness is snug
around the child’s upper torso. The
child is now secure in the cockpit.
PREPARE THE CHILD COCKPIT ADJUST CHILD SEAT HEIGHT
SECURE THE CHILD
ADDITIONAL CHILD FITTING TIPS
3. FIT AND SECURE THE CHILD
To adjust the seat, follow these steps:
WARNING Child must not be in the
carrier while adjusting seat height.
To Next Page
Loading...
Need help?
General
