Osprey SISKIN 12 User Manual

SISKIN | SALIDA SERIES
6
FEATURE DETAILS
LIDLOCK HELMET ATTACHMENT
12L / 8L
Osprey’s LidLock easily and securely
carries a bicycle helmet.
1 Locate the LidLock helmet
attachment clip near the top of the
pack’s front panel and pull away
from the pack.
2 In the vertical position, pass
LidLock through helmet vent
from the bottom and engage in
horizontal position.
3 Inside the pack's front slash
pocket is a cord loop to increase
or decrease the LidLock's tension.
FULL FACE HELMET CARRY
12L / 8L
To attach a full face helmet:
1 Unclip the two upper compression
straps.
2 Place the helmet face opening up
on the front panel of the pack and
thread the two compression straps
through the helmet’s face opening.
2 Re-clip the compression strap
buckles and tension them to hold
the helmet securely to the pack.
3 Clip the helmet’s chinstrap through
the blinker light attachment near
the base of the front panel for extra
carrying stability.
U-ZIP MAIN COMPARTMENT
ACCESS
12L / 8L
A large U-zip allows for complete
access to the main compartment
of the pack. Organization for your
essentials and pocketing sized for
bike-specific tools and gear.
BLINKER LIGHT ATTACHMENT
12L / 8L
Blinker light attachment and reflective
patch for safety.
INTERNAL ORGANIZATION
12L / 8L
Organization for essentials and pocketing
sized for bike-specific tools and gear.
SCRATCH-FREE SLASH POCKET
12L / 8L
Scratch-free, heat-embossed zippered
slash pocket for sunglasses or
electronics.
UPPER COMPRESSION STRAPS
AND SHOVE-IT POCKET
12L / 8L
A front panel shove-it pocket for quickly
stashing gear. The pocket's upper
quick-release compression straps
secure a full face or allow for pack
compression for added stability.
ZIPPERED HIPBELT POCKETS
12L
On-trail access for small items.

Osprey SISKIN 12 Specifications

General

Brand	Osprey
Model	SISKIN 12
Category	Sports & Outdoors
Language	English