SISKIN/SALIDA SERIES
4
FEATURES
RESERVOIR SLEEVE
12L / 8L
The dedicated internal reservoir sleeve's direct-zip access allows for easy loading/
unloading of the included Hydraulics® 2.5L LT reservoir. An internal hanging loop
with buckle ensures proper vertical orientation and stability. Compatible with any
reservoir up to 3L.
For more information on Osprey's full line of reservoirs and reservoir care,
visit osprey.com.
LIDLOCK HELMET ATTACHMENT
12L / 8L
Osprey’s LidLock easily and securely carries bicycle helmets.
1 Locate the LidLock helmet attachment clip near the top of the
pack ’s front panel and pull away from the pack.
2 In the vertical position, pass LidLock through helmet vent from
the bottom and engage in horizontal position.
3 Inside the pack's front slash pocket is a cord loop to increase
or decrease the LidLock's tension.
FULL FACE HELMET CARRY
12L / 8L
To attach a full face helmet;
1 Unclip the two upper compression straps.
2 Place the helmet face opening up on the front panel of the pack and thread
the two compression straps through the helmet’s face opening.
3 Re-clip the compression strap buckles and tension them to hold the helmet
securely to the pack.
4 Clip the helmet’s chinstrap through the blinker light attachment near the
base of the front panel for extra carrying stability.
U-ZIP MAIN COMPARTMENT ACCESS
12L / 8L
A large U-zip allows for complete access to the main compartment of
the pack. Organization for your essentials and pocketing sized for bike-
specifi c tools and gear.
RESERVOIR BITE VALVE MAGNET
12L / 8L
The sternum strap magnet allows for quick access to the reservoir bite valve.
To Next Page
Loading...
Need help?
General
