8
LIABILITY
The manufacturer recommends using the device only under the specified
conditions and for the intended purposes. The device must be
maintained according to the instructions for use. The manufacturer is
not liable for damage caused by component combinations that were not
authorized by the manufacturer.
COMPLIANCE
This component has been tested according to ISO standard to
three million load cycles. Depending on the amputee’s activity this
corresponds to a duration of use of three to five years. We recommend
carrying out regular yearly safety checks
ISO 10328 - P6 - 136 kg *)
*) Body mass limit not to be exceeded!
For specic conditions and limitations of use see
manufacturer’s written instructions on intended use!
To Next Page