8
. To add flexion stop: follow steps and , insert desired flexion stop,
then follow step .
BRACE MAINTENANCE
Unloader One is designed for minimum maintenance and care. Follow
these easy maintenance steps to keep brace in good condition.
CLEANING
• Liners may be wiped down in place with rubbing alcohol for a
quick cleaning
• For more thorough cleaning: liners, straps and strap pads may
be removed.
• To aid in strap application after cleaning, see Figure for final
configuration.
•
•
• Hand-wash using mild non-detergent soap
• Rinse thoroughly and air dry
HINGE
• For safety reasons, hinge should only be disassembled by a health
care professional.
• Check regularly for foreign materials in hinge (i. e. dirt or grass).
• Clean dirt from hinge using tap water and/or compressed air.
: If brace is used in salt water or chlorinated water, rinse well with
fresh tap water and air dry brace. A regular service routine will ensure
hinge, liners, straps and pads are in optimal working condition.
BRACE ACCESSORIES
Össur offers accessories that meet specific needs of the Unloader One.
These accessories can be purchased through the brace provider or Össur
Customer Service Department.
• Extra Set of Liners
• Replacement Straps
• Strap pads
• Anti Migration System (AMS) wrap
To Next Page
Loading...
Need help?
General
