EasyManua.ls Logo

OSTBA ZJ-521 - Parts Identification; Before First Use

OSTBA ZJ-521
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION: hot surface.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, ONLY
AUTHORIZED PERSONNEL SHOULD DO REPAIRS.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug . If the plug does not fit
fully into the electrical outlet contact a qualified electrician. Do not modify the plug in any way
or use an adaptor.
PARTS IDENTIFICATION
BEFORE FIRST USE
Read all instructions carefully and keep them for future reference.
Remove all packaging
Clean the Cooking Plates by wiping a sponge or cloth dampened in warm water.
DO NOT IMMERSE THE UNIT AND DO NOT RUN WATER DIRECTLY ONT THE
COOKING SURFACES.
Dry with a cloth or paper towel.
For best results, lightly coat the cooking plates with a little cooking oil or cooking spray.
Notice: When your Grill Toaster is heated for the first time, it may emit slight smoke or odor.
This is normal with many heating appliances. This does not affect the safety of your appliance.
1. Handle
2. Power Light
3. Ready Light
4. Upper Housing
5. 180 degree open toggle
6. Arm
7. Lock
8. Grill Non-stick Plate
9. Bottom Housing