Oster Designer Series - Speed Modes and Settings; Speed Modes: Low, Medium, High; Pre-Programmed Settings

5
sPeed modes: low, medIum, HIgH
• ToblendinHighSpeed,pressthe“HIGH”button.
• ToblendinMediumSpeed,pressthe“MED”button.
• ToblendinLowSpeed,pressthe“LOW”button.
• ToStopblending,pressthe“ON/OFF”button.Themotorwillcome
to a stop. (Pressing the “ON/OFF” button stops the motor and turns off
the blender.)
• Youcanmovebetweenspeedsatanytimewhileblendingbypressingany
of the other speed buttons. The new speed will start without interruption.
• Pressingthe“PULSE”Buttonwillgiveamomentarypulseathighspeed.
The motor will then stop.
NOTE: Pressing the “ICE CRUSH or FROZEN DRINKS” or the Speed
button at which it is blending will also stop the motor.
Pre-Programmed settIngs
Your new blender features 2 Pre-Programmed Settings:
“Ice Crush” and “Frozen Drinks”.
• The“ICECRUSH”settingisidealforcrushinglargerquantitiesofice.
The “ICE CRUSH” mode pulses between high and off for 30 seconds
and will automatically shut off at the end of the cycle.
• The“FROZENDRINKS”settingisdesignedforperfectlyblended
frozen drinks. The “FROZEN DRINKS” setting runs on high speed
for 45 seconds and will automatically shut off at the end of the cycle.
• Tostopblendingineitherofthesesettings,pressthe“ON/OFF”button.
The motor will come to a stop. (pressing the “ON/OFF” button stops the
motor and turns the blender off.)
• Pressingthe“PULSE”buttonwillgiveamomentarypulseathighspeed.
The motor will then stop.