www.oster.com
4
HOW TO:
Preparing your breadmaker
1 Place the breadmaker on a counter where the plug will reach an outlet. DO NOT
yet plug the machine into the wall outlet. You will be shown later when to do this.
2 Make sure you can open the breadmaker top without
hitting the top of kitchen cabinets.
3 Open the lid and remove the baking pan. To do this,
simply grasp the handle of the pan and pull straight
up. Use a gentle, non-abrasive soap and wash, rinse,
and dry the pan thoroughly.
4 Attach the kneading blade (a) to the baking pan (b),
as shown. You will nd the kneading blade in a small
plastic wrap attached to the power cord.
5 Set the pan aside. Do not yet place the pan into the
breadmaker.
You’re ready to start!
a
b
To Next Page
Loading...
