English-9
IONIC TOURMALINE NON-STICK FINISH
(Models GCSTCM2002 & GCSTCM2003)
• Tourmaline technology infuses the soleplate with semi-precious stones, which
produce extra negative ions for better results and protection to the fabrics from
heat damage.
• The non-stick Tourmaline coating prevents fabrics and starch residue from
sticking to soleplate.
• Provides high glide ability for quick and easy ironing with superior soleplate
resistance.
ANTI-CALC
Anti-calc feature helps prevent build up of mineral deposits in your iron. This
prolongs its life and improves iron’s performance.
ANTI-DRIP
Produces steam without dripping, spitting, or leaking through soleplate, even at low
temperatures.
3 WAY AUTO-OFF FEATURE
(Model GCSTCM2003 only)
When iron is plugged in, the stand by indicator will light steadily,
indicating that there is power to the iron.
If You Leave Iron:
In a horizontal position without moving it, or accidentally tip iron over,
it will automatically stop heating after 30 seconds (+/- 5 seconds). The
stand by indicator light will start blinking.
In a vertical position (on its heel rest) without moving it, iron will
automatically go into stand by mode after 15 minutes (+/- 1 minute).
The stand by indicator light will start blinking.
If someone moves iron, it will reset and start heating up again to be
used.
IMPORTANT: Indicator light will continue to blink until unplugged or
reset.
To reset iron:
Move iron back and forth and allow it to reheat for 2 minutes. Indicator will stop
blinking and stay solid on and iron will start heating again.
WARNING: The 3 way auto-off is a safety feature, not a recommended means for
turning your iron off.
30 SECONDS
15 MINUTES
30 SECONDS
To Next Page
Loading...
