10
9
Using your Blend-N-Go
®
cup with your Oster Pro Series
Blender
Before washing ensure the blender is off and unplugged. Wash all components
except blender base with soapy water with a soft sponge and a bottle brush. Do
not use abrasive cleansers or sponges for cleaning. Rinse well and dry. Parts are
also dishwasher safe. Do not blend hot liquids.
Place desired ingredients into smoothie cup according to the following order:
Liquids, fresh ingredients, frozen fruit, ice, yogurt and ice cream.
(Cut all firm fruits, vegetables and other foods into pieces no larger than 1/2-inch
(1.25 cm) by 2 inches (5.0 cm).
• Place Blade into Threaded Jar Bottom or adapter.
• Place sealing ring over blade assembly. Carefully press and tuck sealing ring into
locking groove.
• Place blade assembly into cup.
• Be sure the Integrated Blade Assembly is tightened to the jar before using.
• Place cup assembly onto Blender base.
• Hold cup in position. Operate Blender according to the instructions in your
Blender User Manual. Blend until desired consistency.
• Place lid on cup and turn clockwise to tighten.
Enjoy your blended drink!
Blend-N-Go
®
Mini Jar Accessory (Select Models Only)
NOTE: For proper installation onto Blender Motor base, make sure locking
lever rotates past the anti-rotation tabs on the mini jar.
A. Locking Lever
B. Blender base
NOTE: Mini jar attachment is only compatible with grey threaded jar bottom
with locking lever.
NOTE: Do not blend hot liquids. Cut all firm fruits, vegetables, and other foods
into pieces no larger than 1/2-inch (1.25 cm) by 2 inches (5.0 cm).
TIP: Recommended foods for blending in mini jar include coffee beans, baby
food, small batches for dips and purees.
A
B
Figure 2Figure 1
Mini Jar with
Drink Lid
Mini Jar &
Threaded jar
bottom with
locking lever
NOTE: Threaded Jar base with
Locking Lever MUST be used
with Mini Jar attachment
Figure 3
BLSTEPH_22EM1.indd 9-10BLSTEPH_22EM1.indd 9-10 2022/12/12 上午9:562022/12/12 上午9:56
To Next Page
Loading...
