4
5
LEARNING ABOUT YOUR
10 CUP FOOD PROCESSOR
a
b
e
g
h
i
j
c
d
Small Food Pusher
Large Food Pusher
Food Chute Lid
Reversible Slice/Shred Disc
Disc Stem
Dough Blade
Multi-purpose Blade
Bowl
Base
Control panel
f
BEFORE USING YOUR OSTER®
FOOD PROCESSOR
• When unpacking the product and removing packing material, handle
the chopping blade and slice/shred discs carefully; they are very sharp.
• Wash all parts except the Base in hot, soapy water. Rinse them dry.
These parts can also be placed in the dishwasher. Be sure to read the
Care & Cleaning Section of this manual to learn the correct methods
for taking the unit apart and cleaning.
LEARNING ABOUT YOUR FOOD
PROCESSOR:
Using Your Food Processor
NOTE: Do not attempt to chop ice in this food processor; it will damage the
bowl, dull the Chopping Blade. This unit will not whip cream, beat egg whites,
grind coee beans, spices or other items with high oil content, or slice or shred
hard-cooked eggs, marshmallows, or soft cheeses.
CAUTION: For your protection, this unit has an interlock system. The processor
will not operate unless the bowl is properly locked onto the base, cover is
properly locked onto the bowl and large food pusher is engaged in chute. Do
not attempt to operate the unit without the bowl lid, bowl and food chute
correctly in place. Be sure base is on a at,
dry and clean surface before you begin
processing.
1 Using the PULSE control: You can control
the texture of processed foods better
by using the PULSE button on your food
processor. Simply press and release to
quickly turn the food processor on and
o. This allows you to check processed results and control the consistency.
For longer processing, continue pressing the PULSE button.
2 Using the additional buttons: Add ingredients through the feed tube;
remove the pusher and ll the feed tube as directed (see How to Slice or
Shred). Engage the pusher and press the desired function button. The
motor will start. Press the Pusher rmly down until all ingredients have
passed into the work bowl. Remove the Pusher and rell ingredients as
needed. Press the OFF button when nished.
3 OFF Setting: Press the OFF button in between jobs to stop the food processor.
When not in use, the appliance should always be unplugged.
Figure 1
a
b
c
d
e
f
j
i
h
g
FPSTFP1355_14ESM2.indd 4-5 17/10/14 8:54 AM
To Next Page
Loading...
Need help?
General
