Need help?Do you have a question about the OTARI MX-5050 BII Series and is the answer not in the manual?
General| Input Impedance | 10 kOhms |
|---|---|
| Output Impedance | 600 Ohms |
| Tape Speed | 7.5 and 15 ips |
| Track Configuration | 2-track, 4-track |
| Frequency Response | 30 Hz to 20 kHz ±2 dB at 15 ips |
| Inputs | XLR, RCA |
| Outputs | XLR, RCA |
| Reel Size | Up to 10.5 inches |
| Heads | Erase, Record, Playback |
Essential safety instructions to prevent fire or shock hazards, and contact details for Otari service.
Details on MX5050B models, head formats, tape, and system features.
Description of the tape transport system and record/reproduce electronics.
Lists of accessories, technical specifications, and audio performance metrics.
Guidelines for unpacking, choosing a location, and environmental conditions.
Physical dimensions, initial switch settings, and rear panel connection details.
Procedures for AC power connection and signal wiring for various connectors.
Overview of transport controls, indicators, pushbuttons, and CUE lever.
Detailed steps for normal recording, selective reproduction, and editing.
Procedure for preparing the unit and reproducing recorded tape.
Required tools, cleaning methods, and demagnetizing procedures.
Procedures for lubricating the capstan and performing electronic adjustments.
Steps to change tape speeds and re-adjust the amplifier.
Guide to accessing the amplifier and its adjustment layout.
Provides PCB pattern layouts and general parts information for service.
Detailed parts lists for specific PCB assemblies like PB-16E and PB-46Q.
Parts lists and exploded views for overall and head assemblies.
Exploded views and parts lists for tape deck and mechanical components.
Exploded views and parts lists for switch, connector, amplifier, and reel assemblies.
Detailed schematic diagram for the A1062 Record and Reproduce Amplifier.
To Next Page
