English
EC Declaration of Conformity
This declaration of conformity is issued under the sole responsibility of
the manufacturer, that the equipment named here has been designed to
comply with the relevant sections of the above referenced specifications
and is in accordance with the requirements of the Directive(s).
Signed by:
Name: Anselm Gademann
Position: Engineering Supervisor
Location: Owatonna, Minnesota USA
Date: February 23, 2018
Authorized Representative
Name: Bosch Automotive Service Solutions GmbH
Address: Am Dörrenhof 1
85131 Pollenfeld / Preith, Germany
Manufacturer Bosch Automotive Service Solutions Inc.
655 Eisenhower Drive
Owatonna, Minnesota 55060 USA
in accordance with the following Directive(s):
2006/42/EC Machinery Directive
hereby declare that:
Product Name: Engine Stand and Adapters
Product Type: Equipment
Product Number 1750A (includes adapters 205061 and 528859)
The following harmonized standards have been applied:
BS EN 13155:2003+A2:2009 Cranes and Non-Fixed Load Lifting Attachments
EN ISO 12100 Safety of Machinery
Any modification to the product not expressly approved by the
manufacturer shall void the validity of this declaration.
English
EC Declaration of Conformity
This declaration of conformity is issued under the sole responsibility of
the manufacturer, that the equipment named here has been designed to
comply with the relevant sections of the above referenced specifications
and is in accordance with the requirements of the Directive(s).
Signed by:
Name: Anselm Gademann
Position: Engineering Supervisor
Location: Owatonna, Minnesota USA
Date: February 15, 2018
Authorized Representative
Name: Bosch Automotive Service Solutions GmbH
Address: Am Dörrenhof 1
85131 Pollenfeld / Preith, Germany
Manufacturer Bosch Automotive Service Solutions Inc.
655 Eisenhower Drive
Owatonna, Minnesota 55060 USA
in accordance with the following Directive(s):
2006/42/EC Machinery Directive
hereby declare that:
Product Name: Engine Stand and Adapter
Product Type: Equipment
Product Number D05223ST (includes 205466)
The following harmonized standards have been applied:
BS EN 13155:2003+A2:2009 Cranes and Non-Fixed Load Lifting Attachments
EN ISO 12100 Safety of Machinery
Any modification to the product not expressly approved by the
manufacturer shall void the validity of this declaration.
To Next Page
Loading...
