OTC 1750 User Manual

Sheet No.
Issue Date: Rev. F April 29, 2019
© Bosch Automotive Service Solutions Inc.
1 of 3
Explanation of Safety Signal Words
The safety signal word designates the degree or level of hazard seriousness.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided,
may result in property damage.
Original Instructions
Tool Box
Grease Fittings
Tilting Shaft Assembly
Engine Mounting Adapter Assembly
(Universal Mounting Adapter shown)
Crank Handle
Head Assembly
Oil Fill Plug
Oil Fill Plug
Jack Release Valve
Jack Handle
(in storage position)
Floor Locks
Lifting Jack
Figure 1
Assembly &
Operating Instructions for: 1750
1750A
D05223ST
Form No. 102302
Heavy-Duty Engine Repair Stand
Maximum Capacity: 2722 kg (6000 lbs.)
Engine Stand Weight: 260 kg (573 lbs.)
Description: Designed for mounting engines, transmissions, or other components by using the universal
mounting plate or a mounting plate designed specifically for the application. The component may be rotated
360 degrees by using the crank handle; the component may be raised by using the lifting jack to increase swing
radius for clearance when rotating the component. Two front wheels and two rear casters provide mobility.
655 EISENHOWER DRIVE
OWATONNA, MN 55060 USA
TELEPHONE: (507) 455-7000
TECH. SERV.: (800) 533-6127
FAX: (800) 955-8329
ORDER ENTRY: (800) 533-6127
FAX: (800) 283-8665
INTERNATIONAL SALES: (507) 455-7223
FAX: (507) 455-7063

OTC 1750 Specifications

General

Brand	OTC
Model	1750
Category	Racks & Stands
Language	English

Summary

Heavy-Duty Engine Repair Stand

Product Description and Specifications

Details the stand's design for mounting engines, capacity, weight, and mobility features.

Explanation of Safety Signal Words

Defines the degree of hazard seriousness for DANGER, WARNING, and CAUTION signal words.

Safety Precautions

General Operating and PPE Requirements

Covers studying instructions, operator qualifications, and wearing eye protection meeting standards.

Load Capacity and Handling

Advises on not exceeding capacity, using hard level surfaces, and securing loads properly.

Engine Mounting and Stability

Details securing engines, centering balance, using correct screws, and maintaining support.

Safe Lifting and Operation Practices

Includes advice on lifting jack use, slow pressure release, and avoiding alterations.

Assembly Instructions

Step-by-Step Assembly Guide

Provides numbered steps for assembling the head assembly, tool box, jack, and lifting jack.

Mounting an Engine

Using the Universal Adapter Plate

Guides on selecting, attaching, and aligning the adapter plate and engine to the stand.

Maintenance and Operation Features

Handle Locking Mechanism Operation

Explains how to engage and disengage the positive-crank handle locking mechanism.

Preventive Maintenance Procedures

Details regular checks for grease fittings, gearbox oil, hydraulic jack oil, and screw torque.

EC Declaration of Conformity

Product Compliance Statement

Declares conformity of the equipment with relevant directives and harmonized standards.