Otis & Eleanor BONGO-001 User Manual

WHAT”S INSIDE
BUTTON CONTROLS
GETTING STARTED
After charging your BONGO, slide the power switch into the “ON” position. Then, there are two
ways to connect:
* Wirelessly with Bluetooth. Connecting with Bluetooth is simple:
! 1.Go to your device Settings and enable Bluetooth.
! 2. Next, search for available bluetooth devices.
! 3. Then, press and hold the Multi-Function button on your BONGO for 6 seconds
! 4. Select “BONGO” and enjoy!
* Using your 3.5 mm Cable:
! Insert 3.5mm plug into the BONGO, and the other end into the device you wish to use.
LED INDICATORS
!
Blue:
! *BONGO is on and ready for pairing.
! *Once BONGO is paired, the blue light will flash once every 5 seconds
Red:
! *Red flashing light means the battery is low
! *Red solid light means the battery is charging
Blue & Red:
! *Alternating Blue and Red flashing indicates the device is in pairing mode, and is searching for devices to pair with.
User Guide and Important Information
BONGO Bluetooth Speaker
* BONGO Bluetooth Speaker
* Protective Hemp Satchel
*USB to micro-USB Charging Cable
*3.5mm to 3.5mm Auxiliary Line
Tip: BONGO will
automatically search for
and pair with a
previously paired device.
Pairing will automatically
occur if the BONGO is
powered on and the
preset device is in range
with bluetooth enabled.
Model name:BONGO-001
FCC ID:2ABADBONGO

Otis & Eleanor BONGO-001 Specifications

General

Brand	Otis & Eleanor
Model	BONGO-001
Category	Speakers
Language	English

Summary

Getting Started with BONGO Speaker

Connect Wirelessly via Bluetooth

Learn how to pair the BONGO speaker with your device using Bluetooth for wireless audio playback.

Connect via 3.5mm Cable

Use a 3.5mm audio cable for a wired connection between your device and the BONGO speaker.

BONGO LED Indicator Guide

Understanding LED Status

Interpret the different light patterns and colors of the LED indicator for device status.

User Interface and Functions

Power and Pairing Controls

Instructions for powering on the device and activating Bluetooth pairing mode.

Call and Audio Management

How to answer, end, refuse calls, use voice dial, and manage music playback and tracks.

Volume and Track Navigation

Details on adjusting volume and navigating between audio tracks using the speaker buttons.

BONGO Charging and Battery

Charging Process

Guide on how to charge the BONGO speaker using a micro-USB cable and battery indicators.

Battery Status and Tips

Information on low battery alerts, charging completion, and tips for battery preservation.

FCC Compliance and Notices

FCC Regulatory Information

Details on FCC compliance rules, potential interference, and user cautions for the equipment.