Otone BluWall Direct - Page 6

Set Up
Direct connection to BluWall Direct
Even without a WiFi network, you can connect your mobile device to multiple BWD speakers using
Wi-Fi Direct. (Note: when in direct connection mode it is only possible to play music stored locally on
your device).
Please follow the steps below to connect your device:
Step 1: Press and hold the power button (2) for 3 seconds, until the white power indicator light starts to
ash. After a further 5-10 seconds the white light will stop ashing and remain solid white. (Note: If
connecting to multiple speakers it is advised to switch them on one at a time, then connect each in
turn).
Step 2: Go into the Wi-Fi settings screen on your mobile device and switch on Wi-Fi.
Step 3: In your WiFi settings screen, nd the network named ‘OTONE BWD ****’, then select to connect
to your BWD speaker;