To Next PageTo Next Page
Need help?Do you have a question about the Otto REGAL and is the answer not in the manual?
General| Brand | Otto |
|---|---|
| Model | REGAL |
| Category | Indoor Furnishing |
| Language | English |
Lists all components and hardware required for assembling the REGAL unit, including part numbers and dimensions.
Attaching initial components and hardware to the base panels as per step 1 instructions.
Securing vertical side panels and shelves according to steps 3 and 4 of the assembly process.
Continuing the assembly by attaching further components and installing shelves as per steps 5 through 8.
Completing the structural assembly and final adjustments as shown in steps 9 and 10.
Guidelines for cleaning and maintaining the assembled unit using recommended methods and materials.
Lists all components and hardware required for assembling the EINSCHUB TÜR, including part numbers and dimensions.
Instructions for the initial stages of assembling the EINSCHUB TÜR, including panel preparation and hinge attachment.
Attaching drawer slides and completing the drawer assembly for the EINSCHUB TÜR unit.
Recommended procedures for cleaning and maintaining the EINSCHUB TÜR unit.
Lists all components and hardware required for assembling the EINSCHUB SK, including part numbers and dimensions.
Instructions for attaching panels and drawer slides as part of the EINSCHUB SK assembly.
Completing the EINSCHUB SK assembly by attaching drawer components and installing the drawers.
Recommended procedures for cleaning and maintaining the EINSCHUB SK unit.
