Ouilo QP112 - Installation Continued; Connecting Exhaust Hose and Bracket

EN
4
EN
INSTALLATION (CONTINUED)
3. Connect the exhaust hose to the hose connector on back of the unit. Slide-in the hose connector
downwards until it is locked in place.
4. Connect the window bracket to the window bracket panel adapter. Ensure that all connections are tight and
installed properly.
5. Connect the window bracket to the window.
6. The Quilo
TM
Portable Air Conditioner is now ready to use.
Note:
After setting the window bracket to the size of your window, please remove it from the window and follow the
instructions below.
Exhaust Hose:
Dia. 5.9" (15cm)
Length: 10.6" to 59" (27cm to 150cm)