replaced with the battery model.
5. Before washing the electric bicycle, you should understand the contents of "Washing
Precautions" in the manual.
6. When adjusting the handlebars or saddles, care should be taken not to expose the safety line
markings of the handlebars and saddles (if applicable).
7. Before driving, check whether the power circuit, lighting circuit, etc. are in normal state;
whether the front and rear brakes work normally; the handlebars and front and rear wheels are
fixed; the air pressure of the tire; whether the reflector is damaged or polluted, etc. If there is any
abnormality, please contact the far-reaching dealer or after-sales maintenance department in
time for maintenance.
8. For new car battery installation and old car battery replacement, professionals must install and
replace the battery according to the schematic diagram of the whole vehicle, battery installation
diagram and electrical schematic diagram in the manual; when replacing the battery, the battery
connection line should be replaced at the same time and not reused. Use the company's original
accessories. Do not place the battery sideways or upside down.
9. Dealers and users are prohibited from wiring or modifying the structure and performance of
vehicles without permission. It is forbidden to modify the vehicle, especially to change the
battery capacity, and voltage, increase the maximum speed of the vehicle and avoid danger. It is
not allowed to illegally modify electric vehicles and use substandard batteries and charging
equipment.
10. It is forbidden to touch the live parts of the electric bicycle with wet hands and metal
conductors, such as the battery box socket, the battery box connection socket and the charger
power plug, and other parts. Strictly prevent water from entering the electrical parts; when
cleaning the vehicle, avoid water impacting electrical components such as charging sockets,
wiring harness connectors, and fuse tubes, and do not splash water directly into the storage box.
11. When replacing the fuse, the fuse of the specified type and specification should be used. It is
strictly forbidden to short-circuit the wires without adding a fuse. The fuse should be in good
contact with the card slot. If it is loose, it may cause the fuse to heat up and cause an accident.
12. Do not put flammable, explosive, and other dangerous goods, items with low heat resistance,
liquid food, and wet rain gear into the storage box.
13. Do not use chargers of other brands and specifications to charge; it is also not allowed to
charge other electric bicycles with the chargers provided by the company.
15. When charging, first connect the output plug of the charger with the charging jack of the
battery, and then connect the input plug of the charger to the AC power supply.
16. The battery and the charger being charged should be placed in a safe place out of reach for
children. There should be no flammable and explosive materials around. It should be ventilated
and dry. It should not be charged in the open air. Accidents such as electrical short-circuit and fire
caused by factors such as rain; it is forbidden to use the charger in an environment that is
unstable, excessive oil fume and dust, humidity, and direct sunlight; do not connect the charger
during thunder and lightning. When charging, the battery and charger should not be covered
with anything, and the charger should not be placed on the saddle, so as to avoid accidents that
affect the heat dissipation. Do not charge the battery at home. Do not connect the charging line
indiscriminately or
Charge the vehicle for a long time.
To Next Page
Loading...