whether the headlights and taillights are on, and whether the headlights are normal.
2. Check the front and rear brake levers respectively to see if the power is off and whether the
rear brake lights are on.
3. Operate the turn signal switch and check whether the turn indicator is working normally.
Inspection, Maintenance and Repair
Dear user friends:
In order to prolong the service life of the vehicle and enable it to drive safely and comfortably,
please check and maintain it regularly. When the vehicle is stagnant for a long time, it should also
be checked regularly.
When a new car drives 300 km, it needs to be checked and maintained.
Preparation before inspection
1. Please choose a spacious and flat place with double support.
2. Check whether the power supply can be used normally. Status of the power circuit, lighting
circuit, etc.
3. When the driving inspection is required, it should be carried out in a safe place. Pay attention
to the surrounding safety and eliminate abnormality before driving.
4. Whether the vehicle reflector is damaged or contaminated.
5. If it is difficult to solve it by yourself, you can entrust the far-reaching dealer or the after-sales
maintenance department for inspection.
Image inspection of rear view mirrors (if any)
1. Check the rear view mirror for dirt and damage, keep the mirror surface clean, and replace it in
time if it is damaged.
2. From the driver's position, observe whether the rear view mirror can see the road conditions
behind and on the side respectively.
Reflector, license plate inspection
1. Check whether the reflector is stained or damaged. If it is stained or damaged, it cannot be
Warn
Lighting will affect the observation of road conditions and pedestrians at night, as well as the
observation of oncoming vehicles. The taillights can interfere with the view of the car behind. The
brake lights and turn signals (if any) will prompt the rear car to clearly understand the driver's
intention and avoid danger.
To Next Page
Loading...