Need help?Do you have a question about the OutBack Power FLEXpower ONE VFX3524 and is the answer not in the manual?
General| Model | FLEXpower ONE VFX3524 |
|---|---|
| Type | Inverter |
| Rated Power | 3500VA |
| Output Voltage | 120/240 VAC |
| Efficiency | 90% |
| Surge Power | 7000 W |
| Dimensions | 29 x 17 x 13.5 in (73.7 x 43.2 x 34.3 cm) |
| Weight | 97 lb (44 kg) |
| Output Frequency | 60 Hz |
| Transfer Time | 16 ms |
Explains the meaning of symbols used throughout the manual for safety and operational guidance.
Specifies the intended users of the installation manual, focusing on qualified personnel.
Provides definitions for key terms and acronyms used in the manual.
Outlines general safety precautions and limitations on the equipment's use.
Details necessary personal safety equipment and practices for handling the equipment.
Covers specific safety warnings related to system voltage, burn hazards, and fire hazards.
Addresses safety concerns related to photovoltaic (PV) arrays and potential shock hazards.
Provides essential safety guidelines for working with battery banks, including electrocution hazards.
Lists relevant electrical codes and standards applicable to the system installation.
Offers guidance and resources for the proper recycling of electronic and battery components.
Lists the essential components that make up the FLEXpower ONE system.
Describes the intended applications for the FLEXpower ONE system.
Details how the FLEXpower ONE functions in on-grid power applications.
Explains the operation of the FLEXpower ONE in off-grid power scenarios.
Covers the functionality of the FLEXpower ONE in grid-interactive energy systems.
Provides guidelines and specifications for planning photovoltaic (PV) array configurations.
Offers guidance on selecting and sizing battery banks for the system.
Outlines the general requirements and considerations for using a generator with the system.
Details the necessary tools, materials, and accessories for system preparation.
Specifies suitable installation locations and seismic activity considerations.
Describes environmental conditions and mounting surface requirements for the unit.
Defines essential clearance and access space requirements for safe installation and maintenance.
Provides the physical dimensions of the FLEXpower ONE system and its mounting bracket.
Explains how to prepare enclosures for cable routing using knockouts and conduit.
Provides detailed instructions and considerations for mounting the FLEXpower ONE system.
Guides the user through the process of removing various covers for access to internal components.
Covers general wiring practices, conductor requirements, and local code compliance.
Details how to access the internal wiring compartments for connections.
Explains system grounding responsibilities and requirements, including neutral-to-ground bonds.
Provides specific instructions and requirements for making DC electrical connections.
Details the procedures and safety precautions for making AC electrical connections.
Guides the user through pre-startup procedures and the energizing/startup process.
Instructs on the proper reassembly of the system enclosures after installation.
Covers initial parameter settings for the MATE2, inverter, charger, and monitoring components.
Details how to configure the time, date, and display settings on the MATE2 controller.
Explains how to select the AC source (Grid/Generator) and set the input current limit.
Guides users on how to access the system's advanced settings menu, including password entry.
Details setting battery capacity and return amps when using the FLEXnet DC Monitor.
Explains how to adjust charging limits, voltage, and time parameters for battery charging.
Provides step-by-step instructions for safely de-energizing and shutting down the system.
Presents a matrix detailing features across different FLEXpower ONE models.
Lists the electrical specifications for 120 Vac/60 Hz FLEXpower ONE configurations.
Details the mechanical specifications and dimensions for 120 Vac/60 Hz models.
Provides electrical specifications for FLEXpower ONE models operating at 230 Vac/50 Hz.
Lists the mechanical specifications and dimensions for 230 Vac/50 Hz configurations.
Describes the FLEXware Surge Protector, its function, LEDs, and specifications.
Covers specifications for PV array sizing and battery bank sizing.
Explains how to estimate amp-hour requirements for battery bank sizing calculations.
Details the terms and conditions of the five-year limited warranty for FLEXpower ONE products.
Provides instructions on initiating warranty service, including RMA process and product return.
To Next Page
