Outland Living 420 Series User Manual

FMI BRANDS INC.
101 – 3570 194 Street, Surrey, BC, Canada V3Z 1A5 | Email: info@outlandliving.com
USA, Canada Toll Free: 1-888-514-1663 | Tel: (+1) 778-294-0988
Hours of Operation: 8:30AM - 4:00PM (Pacific Time) | Customer Service in English only
D.510.000.V2 (English)® Outland Living and the Outland Flame are registered trademarks of FMI Brands Inc.
APPLIANCE MODELS ACCEPTABLE TO BE USED WITH THIS KIT
NGCK-AT 510 (AUTO IGNITION + THERMOCOUPLE MODELS)
TICK SERIES NAME MODEL NUMBERS SERIES NUMBERS
OUTLAND FIRE TABLE FMPPC2E-420 420
WARNING:
This conversion kit shall be installed by a qualified service
agency in accordance with the manufacturer’s Instructions
and all applicable codes and requirements of the Authority
Having Jurisdiction. If the information in these instructions
is not followed exactly, a fire, explosion or production of
carbon monoxide may result causing property damage,
personal injury or loss of life. The qualified service agency
is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation
of the converted appliance is checked as specified in the
manufacturer’s instructions supplied with the kit.
FIRE TABLE
PROPANE TO NATURAL GAS APPLIANCE
CONVERSION KIT
NGCK-AT #510 • AUTO IGNITION + THERMOCOUPLE • INPUT RATING: 50,000 Btu/h

Outland Living 420 Series Specifications

General

Brand	Outland Living
Model	420 Series
Category	Outdoor Fireplace
Language	English

Summary

Appliance Compatibility and Safety Warnings

Acceptable Models

Lists Outland Fire Table models approved for this conversion kit.

Important Safety Warnings

Critical safety information regarding installation and potential hazards.

Conversion Instructions and Preparation

Required Tools and Supplies

Lists tools and materials necessary for the conversion process.

Pre-Conversion Safety

Alerts users to specific safety precautions before starting the conversion.

Step 1: Prepare Fire Table

Initial steps to prepare the fire table for conversion, including turning off the gas and removing panels.

Step 2: Disconnect Propane Source

Instructions for safely disconnecting the propane gas cylinder from the fire table.

Component Replacement and Assembly

Step 3: Remove Old Components

Details on disconnecting igniter, thermocouple, ground wire, and propane hose from the valve.

Step 4: Remove Valve Bracket

Procedure for removing the existing propane gas valve mounting bracket assembly.

Step 5: Disassemble Propane Valve

Instructions for taking apart the original propane gas valve assembly.

Step 6: Assemble Natural Gas Valve

Guidance on installing the new natural gas valve onto the mounting bracket.

Installation and Connection Steps

Step 7: Apply Heat Shrink Tubing

Instructions for sliding heat shrink tubing over the burner venturi tube.

Step 8: Mount New Valve Assembly

Steps to securely mount the assembled natural gas valve bracket onto the appliance.

Step 9: Secure Heat Shrink Tubing

Detailed instructions on applying heat to shrink tubing for a proper seal.

Step 10: Connect Gas Hose

Connecting the natural gas hose to the new valve, with a warning about cross-threading.

Wiring, Testing, and Leak Checks

Step 11: Reconnect Wiring

Reconnecting the igniter cable, thermocouple cable, and ground wire to the new valve.

Step 12: Test Igniter

Verifying the igniter is properly installed and produces a spark for ignition.

Step 13-15: Final Checks

Installing quick-disconnect, confirming knob and supply valve are OFF.

Step 16: Connect to Gas Supply

Connecting the natural gas hose to the house gas line via the quick-disconnect.

Finalizing the Conversion and Operation

Step 17: Turn On Gas

Opening the main gas supply valve to allow flow to the appliance.

Step 18: Leak Testing

Testing all connections for gas leaks using a soap and water solution.

Step 19: Verify Ignition

Testing ignition sequence, thermocouple heat-up, and flame quality.

Step 20: Ignition Troubleshooting

Procedures for addressing issues if the burner does not ignite correctly.

Troubleshooting and Documentation

Ignition Problem Resolution

Further steps for troubleshooting ignition failures and checking components.

Thermocouple Function Explained

Explains the thermocouple's role as a safety shut-off feature.

Marking and Labeling Procedures

Tag 1: Model Identification

Marking the applicable model on the conversion statement label.

Tag 2: Conversion Details

Marking the conversion date and installer identity on the identification label.

Affixing Labels to Appliance

Guidance on attaching the warning labels to the appliance using the provided hang strap.

Conversion Complete

Confirmation that the conversion is finished and instructions for normal igniting.

General Safety and Support Information

Product Usage Guidelines

Important notes on the fire table being a decorative appliance, not for cooking.

Replacement Parts and Support

Information on purchasing accessories and obtaining customer support.