Need help?Do you have a question about the Outland Technology ROV 1000 and is the answer not in the manual?
Details for returning ROV or components for warranty service.
Critical warnings and cautions for ROV operation and safety.
Procedures for safely connecting and disconnecting ROV components.
Guidelines for connecting and grounding the ROV power supply.
Steps for deploying the ROV, including umbilical and cable handling.
Best practices for cleaning, drying, and storing or shipping the ROV.
Overview of the ROV systems, their capabilities, and features.
Description of the ROV control console and its integrated components.
Details on power supply models for ROV 1000 and 2000/2500.
Information on the PS-4000 power supply, its capabilities, and display indicators.
Explanation of the hand controller's buttons, knobs, and joystick for ROV operation.
Details on the ROV cable's construction, conductors, and standard lengths.
Procedures for setting up the control console and power supply units.
Steps for connecting the ROV cable, grip, and control bottle.
Checks and verifications before commencing an ROV mission.
How to adjust video signal using the console's video amplifier.
Detailed steps for performing a preflight check of the ROV systems.
Explanation of available flight modes like Manual, Depth Hold, and Heading Hold.
How to navigate the video overlay menu using keyboard or console switch.
Understanding the system diagnostic display and its parameters.
Using keys to display text pages and edit content on the menu.
Configuring time, date, fonts, software versions, and display data.
Accessing and understanding advanced vehicle setup options.
Guidelines for maintaining the ROV, including daily and periodic tasks.
Pinouts and descriptions for the ROV control bottle connectors.
Pinouts for ROV data, HV, and navigation/sonar connections.
Pinouts for light, manipulator, and camera connections.
Visual diagrams of male and female bulkhead/in-line connector pinouts.
A block diagram illustrating the ROV system's components and connections.
Diagram showing the routing of spare lines between the ROV bottle and control console.
Wiring diagram for ROV-2000/2500 light and manipulator cable.
Wiring diagram for ROV bottle to dual camera cable assembly.
Wiring diagram for ROV bottle to NAV/SONAR cable assembly.
Wiring diagram for VDSL to Gemini 720ik multibeam sonar cable.
Wiring diagram for the ROV C-3400 cable assembly.
Wiring diagram for the thruster jumper cable.
General| Category | Diving Instrument |
|---|---|
| Depth Rating | 1000 ft (305 m) |
| Thrusters | 4 |
| Camera | HD Color Camera |
| Lights | LED lights |
| Manipulator | Optional |
| Power Supply | Surface supplied |
| Tether Length | 500 ft (152 m) standard, optional lengths available |
| Control System | Joystick console |
To Next Page
